Useful content

Sawing machines from manual conveyers. Blueprints.

click fraud protection

It was my first self-made machine.

It would seem a simple thing to install a manual circular saw on the table, but how many new features it gives.

At firstExempt both hands and cut to become more secure.

Secondly, Use of the rip fence allows accurate sawing off parts.

ThirdlyYou can make an additional test portion on the circular saw and make the grooves and spikes, cut at an angle in two planes, making for milling panels... and many other things.

The last publication - Universal workbench workshopI talked about a comprehensive solution for the workplace in the workshop. Here I will tell Only on the circular sawSet out in the table and give drawings of such a decision.

In this setup, the saw may be possible to quickly retrieve it and use hand tools ka. Put the saw back to the table - it is one minute.

The bars are made of long slots in which the free, but four fanerki inserted 10 mm thick without excessive turbulence. These inserts ensures reliable fixation sites saw at four points.

In such a solution may be possible to adjust the height and tilt of the saw blade.

instagram viewer

When I came up with such an attachment, then I set the task - fast and easy to put on and take off the saw, and here there is one more required task - as quickly and easily capture the power button. This is the task I have decided as follows:

power button lock
power button lock

Of 8 mm plywood I made a shape like a horseshoe. It was made for a specific saw, so only show how it works.

The base of the figure is put on the saw handle.

Then turns 90 degrees and pushed the button on the blade, fixing it in the depressed position.

That is, the inner part of the "horseshoe" can wear a button only when it is pressed.

The countertop with a saw can be installed on any suitable base.

The title of the article I promised drawings. The promise of doing - take a mini drawing table for cutting - download.

In the archive you will find the project file into SketchUp and PDF file with instructions, photos, spreadsheets and drawings of parts sawing table and rip fence.

On a note: All the articles of the channel based on materials my site - vsumebelsam.ru

Thank you for reading and... until the next publication.

I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.

As my article hit the famous American magazine
How can I make a cyclone vacuum cleaner.
Toys for children and adults with their own hands.
How to glue the tape from nazhdachki.
Useful miracle fertilizer for tomatoes from a nettle

Useful miracle fertilizer for tomatoes from a nettle

I always grow a lot of tomatoes. And that they should give a good harvest, prepare a variety of ...

Read More

Articles made of cinder block in landscape design: waste matter

Articles made of cinder block in landscape design: waste matter

As fiscal and decorative arrange local area - the remnants of building materials in the landscape...

Read More

Life hacking with a hammer: the secrets of the unexpected application of the tool

Life hacking with a hammer: the secrets of the unexpected application of the tool

From little things make up our lives. We offer to meet with the important things to be repaired, ...

Read More

Instagram story viewer