How to glue the tape from nazhdachki.
This second situation is when the iron is useful. On the first case one can get acquainted of this article.
Next, I will discuss how it is possible, using the iron glue strip grinding machines. It's easy, pretty quick and the savings on the purchase of ready-made belts essential.
About the economy... I thought for his grinding machines (457h76 mm) - to buy the inexpensive ~ 30 rubles \ pc, and most glue ~ 12 rubles \ pc.
We start with the fact that under the old tape making a blank for a new one.
For Kleve seam I bring about 10-12 mm. Using a ruler and the back edge of a knife (also can be applied, for example a fragment of the saw blade for metal) draw a line, bend and fold scraped nazhdachki grain.
Next smear bent piece of PVA glue. (Used D3, I try the brand "Kleiberit" and "Titan"). Using heated iron pasting nazhdachku to the wooden bar. It will take approximately 30 seconds.
Thereafter neatly tear off the tape from the abrasive bar, and the grain itself remains on the piece of wood.
Something that does not come unstuck, just cleans a knife.
You can remove the grain from one side only, but can be removed and the two sides, then the band will turn to the "bald" seams, but it beats at the junction will not grow. I often glue, removing the grain from one side (it's faster), but sometimes do with two.
After such preparation put the tape grain down, top bar, smear glue joint place and also via glue iron.
Keeping iron and approximately 30 seconds. After cooling, the tape can be used immediately.
I usually do several tapes, so it turns out much easier.
For greater clarity, you can watch a video clip of this process.
Other channel publication:
Lathe of the router. Practical experience.
Ctrubtsiny with a clamp stop. Blueprints.
Universal workbench workshop. The history of occurrence.
Subscribe to the channel. Share your publication in social networks. Put huskies and write comments.
Alexander.