"Folding" decorative basket. Sawing on the jig machine.

This basket I was doing in the fall, so taken shape pumpkin. I was wondering if I can make three-dimensional product from flat plates without turning cut rings. Or if you look at the other, the task was to make a decorative basket with arbitrary contour rings.

At one time, hiking kits sold with folding cups. And this, I decided to do the basket on the type, these cups. That is cut ring at an angle to the small ring and is pulled out of a large angle due recorded.

Painted pattern, picked up a blank for a basket and pruned in thickness as the blank tried to saw small rings at different angles.

The probe took 10 mm thickness as the blank. When tilting the saw blade 4 degrees, sawn piece shifted to the seizure of about 4 mm, but the saw blade is tilted to 3 degrees, the offset was already 8 mm - that's it.

Drill holes for sawing sawed off at an angle of 3 degrees piece of test plates and used it as a guide.

And then left to cut it out and collect. Yes, still need to choose the direction of how to cut. I said it right arrow on the template.

To better understand how to do this offer watch the video.

According to this principle can be cut out similar products of various shapes. If I have something else made of this type, be sure to share.

Thank you for reading and... until the next publication.

I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.

On a note:

All articles of this channel is based on materialsmysite -"Joinery"

Other publications in the channel:

Device for milling pattern. The upper pattern

About stairs. with the history of the project

A simple device for the router to make grooves

Basket for pencils on jigsaw machine