How to insulate the door penofolom. Day 10th: consistently keep warm, hurray!

Hello! Thank you for your interest in my article: your dochitki and huskies - my "fuel" that encourages to do and write more and better.

Today will tell about how solved the problem with warming the interior door leading to the kitchen. The fact that "the kitchen waiting room" - the coolest place in the house and warm it until it turns.

Only one way out - to insulate the door leading to the kitchen (despite the fact that it is wooden and thin).

Algorithm insulation doors:

1) Removed the old Soviet blanket, which was once studded door, I remove all nails, to avoid injury (Doors photo on your judgment):

2) I take roulette and Gaugeable width and height internal "squares" the door (in my case, of three). standard depth - 1 cm. This is the thickness of the insulation I bought.

Helpful advice:
Cut penofol and similar insulation is most convenient thick wallpapering knife and level gauge-line:

insulation itself, I took a two-sided: the outer layer of foil (say, should reflect heat), Internal - of polyethylene foam (my hand - warm).

In the photo - the reverse (internal) side penofol:

3) Cut square pieces of insulation furniture staplers and staples 12 mm high targeting to the door. I get a little futuristic:

4) Use of nails CREPLA web of Color Options (also: artificial leather, vinyl, eco-leather) for the door.

A small trick:
on the side where the door hinges leave 8-10 cm stock - then podvernote corner to the door, and 3-4 cm Color Options will cover the gap in the door hinge.

On the disadvantages of my work:

• minus the first - was no iron to smooth cloth Color Options before you mount it to the door. As a result, visible wrinkles and blemishes.
• minus the second - I wonder skeptical about the string, which you can create shapes on Color Options. The door could be not only warm, but also beautiful. Like this, for example:

Thank you for you for reading!
If it is not difficult to put Like, I will be happy!