The path of the b / u asphalt with their hands

IN our city roads and pedestrian roads change so often that the asphalt on them no time to deteriorate. Sometimes for no cracks and is not, and crushed stone layer underneath still strong, but the top layer is still removed and taken away in an unknown direction.

Hon the fact that a used asphalt is quite suitable for reuse, for example, in the country!

I I have already tested the technology used melting / from asphalt with their hands on patching, and now plan to make of asphalt parking lot to his car. Tell us about your clever way to you.

ANDso as to update the asphalt, we need a large metal tub (preferably with handles). We put it on the bricks or the curb on all sides close the non-combustible insulation. How it looks like I can look at these two photos:

It looks like a closed box of insulation:

This direct smelting asphalt tank after removing the cover

Razvodim under the burner capacity andWe fall asleep cut asphaltin capacity.Do not forget from time to time to stir the asphalt shovel.

IMPORTANT!
Wear a respirator - asphalt strongly emits toxic substances during melting.

Primerno 15-20 minutes asphalt is transferred into buckets or truck and unloaded on the repair location:

FROM using tamper-sealing the warm asphalt, periodically shedding its water! It is very important that all the builders are doing:

BUT Here is the path to the backyard, also of b / a of asphalt:

Thank you for having read my article.
I hope it was useful to you.
Put huskies, write comments - it helps the development of channel!