How to quickly clean the mixer?
Wakoksovavshiysya on the inner and outer surface of the concrete mixer not only spoils the appearance of the unit, but also carries serious damage to its technical condition: concrete can get on the belt drive and output of the mixer system.
BUT since the high-pressure cleaner I have, and all the chemistry, I also try not to use my a mixer I just proven way out of scrap materials, and talk about it in this article.
Getting started!
The first thing to do - is to put in a concrete mixer bowl as close to horizontal position - in this situation will affect the cleaning bo most of the unit.
Please note!
Load the machine only when it is picked up steam, to lighter-than-perceived burden. Otherwise, the engine can be immediately put mixer.
Wasypaem the mixer gravel 3-4 buckets fine fraction and a large maximum amount of water that can fit in the internal cavity.
Peye natural abrasive - chippings - cleans the interior of the concrete mixer, we can proceed to clean the exterior.
PSimply presses the rigid metal brush to the body of the concrete mixer, and then the power of rotation and friction does its job - lumps of concrete mixers fly away from the only way.
FROMkeptikov hasten to assure you that this method really works, try it yourself! One such cleaning the concrete mixer at the end of the construction season will be the key to her long life.
All success in building and excellent mood!
- Temporary blind area: so good, I do not want to change it to a permanent
- What insulation does not bite mouse? Experiment.