Where is the money, Zina, or what is more profitable: trapezoidal sheet or evroshtaketnik?

Looking for material for the construction of a new fence to replace the old rotten wood, I came across such a stuff like evroshtaketnik.

At first, he seemed to me just cut into vertical strips a colored steel sheets simulating the usual rustic fence. But the store explained that evroshtaketnik - initially it produced in the form of individual strips of galvanized metal coated with a colored resin layer for protectionAnd it is usually done in the same factory and from the same metal as the trapezoidal sheet!

Evroshtaketnik looks like this:

Mount evroshtaketnik very simple: you can simply screw the edge evroshtaketnika roofing screw with sealing elastic band in the color of the material, and for greater seriousness of the design - to complement the furniture bolt, as shown in the photo higher.

I'm in his case did not "zaparivatsya" and limited to only roofing screws, left a evrozaborov:

Now let us compare what is more profitable - or trapezoidal sheet evroshtaketnik?

I bought a 85-mm evroshtaketnik for 37 rubles / piece.
I did distance between shtaketinami 3.5 centimeters.
On the whole fence 320 require or shtaketin 11 840 rubles.
A plus 1500 I spent on the screws.

The same solid, but would be less beautiful fence made of profiled sheet at cost 8720 rubles (218 rubles per square meter)

Conclusion: Making a fence made of profiled sheet is economically profitable.

But there is a caveat:

If your location is dominated by severe winds, it is best to choose a fence evroshtaketnika because it passes the air and does not deform under its influence.