How do you put the heating cable inside the pipe?

DTo prevent freezing of pipes at low temperatures in the winter can wrap pipe insulation, and can be - set inside the pipe heating cable that connects to the electrical network houses. In our opinion, the second method is much more effective, and in this article we will focus on the installation of the heating cable in the cavity of the pipeline.

The inner cable installation method there are nuances. Firstly, the market is almost no universal cable: cable is either placed inside the pipe or pipes outside the wrapping.
Therefore, pay attention to the information on the packaging.

It is also advised to pay attention to the following points:
cable braid must not release toxic substances ensure that the degree of electrical protection IP68 or higher, and the end sleeve is sealed.

It is easier to install the cable inside the pipe?

To be able to put into the required cable on its end set tee, one of the taps tee through the gland, which comes bundled wire is pulled.

It is important that the cable connecting the clutch was outside the pipe

and the gland, as it does not tolerate contact with water.

Thus tee retraction angle for mounting the heating cable inside the tube is not critical - at least 180 °, 90 ° or 120 °.

Locking wire inside the tube is not required: it simply left in the tube cavity.