Liquid glass, why it is needed and how to apply?
In this article we will talk about ways of applying liquid glass in construction.
Part one. Characteristics waterglass.
Water glass or silicate glue - saving material that is able to withstand both low and high temperature, which is chemically neutral, is water-repellent and antiseptic means.
Liquid glass is used to protect the paint finish of vehicles, for waterproofing wooden floors, concrete floor screeds, and to protect the surface of the pool.
Water glass sold in cans of different volumes.
Part two. Secrets of applying a liquid glass.
In the case of wooden floors process of applying a liquid glass is quite simple: you should maximally remove dust and degrease wooden floors, and then apply the mixture was purchased via a broad brush or pouring liquid glass and its doctor blade or wiping spatula. The result - in the photo below.
If you use a water glass with a concrete floor screed, waterglass be mixed with water in a ratio of 1 to 2. In this case, better to choose the M300 / M400 cement. This thickness ensures you strength, antiseptic properties and flatness.
More water glass can be used to eliminate leaks and the holes: mix the glass and cement in a ratio of 1: 1, add a little water and apply the solution to injury for 60 seconds.
Water glass and cement are mixed in a ratio of 1:10 when working in a high humidity environment: Pools, font, bathrooms. This composition is excellent waterproofing.