How to strengthen the battens on the walls by the carcass

Molded - popular material, of which the demand is due to many factors. Among them - the simple handling of the device technology. If the owner is going to revet by a wall lining, it will be able to do it without excessive force. We just have to follow the technology, which is advised by professionals.

1. How to prepare for the wall lining

Methods of fixing these wooden panels on the wall a few. The most practical is possible to name one that requires installation on the frame. Before installation of the heavy frame building materials present on the walls, must be removed. Then set the carcass structure.

bars 5-10 cm thickness suitable for its assembly. On the wall linings usually set vertically. The frame structure, in turn, should consist of horizontal directional bars. Long distance should not be left between them. Suffice steps about 50 cm.

2. How to fix the battens to the frame

Installation start of the corner of the room. Wall paneling is applied across the bars, and then attach it with screws, clamps, and sometimes the most simple nails. When installing the next panel, put on her groove previous spike.

All panels are fixed to the frame to each other. Due to this method of installation is obtained cladding, which does not even have the minimum through the slits. This means that its insulating properties will be at altitude. When the battens must be cut using simple tools. Well, if the owner has an electric jigsaw. But if you want to be able to cope with a hacksaw and an ordinary wood.

3. How to handle the installed linings

Since this is a material made of wood, need additional decorative and protective treatment. But the ground is applied to start on the battens to the porosity of the material decreased.

On primed battens already possible to apply paint, varnish, glazing impregnation. If the owner wants the structure of wood, from which made lining, it remains visible to the eye, it should use transparent toners or formulations.

What else can you do

If you want such a lining a more functional and practical, is facing mounting lining to lay additional insulation layer. For example, using mineral wool or penoplex. Plates insulator just lay between the frame bars, and then covered with a lining of wood.