Crate for finishing drywall

This material is characterized by versatility of application, it is used not only for finishing, but also to obtain "Drafts" is absolutely smooth, the surfaces on which subsequently the plastic panels are mounted and glued wallpaper or tile. Plasterboard is mounted on a specially created crate, which may consist of a metal profile or of the wooden bars.

Nowadays, most often as a furring for gypsum board using a metal profile, since its installation does not need additional training. Wooden blocks also often require special treatment, and if they are not dried out, or have a lot of knots, their service life will be short-lived.

During installation crates, various types of metal profiles, in particular, the guide, and a ceiling rack. Drywall crate arrange a short distance from the wall, and attach using suspensions to the supporting wall.

The process of installing the metal purlin It begins with the marking on the floor and on the walls. On the floor of pursuing a line that will show how much free space in the room will take plasterboard false walls. Then use a plumb held on the floor line is projected on the ceiling.

Mounting metal battens for gypsum board It begins with fixing the guide profiles on the floor, and then - on the walls to the ceiling. Metal profile credit-toe with screws to be screwed into dowels. Dowels must be placed at least a meter away from each other, it is very important to fit the self-tapping screws on the size. To install the dowels need to drill holes in the walls, but the process is the most time-consuming operation and dusty installation lathing.

When all the guide profiles are installed, begin to set suspensions based on the fact that between them should be placed one sheet of drywall, which will be fitted to them. Suspensions must also be secured to the wall with screws and dowels, but the distance between them can reach one and a half meters.