How to put a ceiling soundproofing yourself

To reduce the penetration of outside noise in the apartment, you need to conduct high-quality soundproofing. Especially a lot of inconvenience to deliver the neighbors living above. A good way to be protected from them - to implement sound insulation ceiling surface. The procedure is not the easiest, but the right to carry it out, if the owner is attentive.

1. Selection of an appropriate sound insulator

Create high-quality sound insulation, you can use different materials. The most successful option would be mineral or glass wool. This fibrous material that suppress the propagation of noise. Of course, it is possible to cope with fewer problems using extruded polystyrene foam. But it is regarded primarily as a heater, and not sound insulator.

2. Preparation of a draft surface for sound insulation

There are different ways to mount the soundproofing material on the rough surface. In this case, better to assemble the frame. If a fix on the ceiling soundproofing material, then finishing is difficult to hold the event.

To assemble the frame and use the most ordinary timber. Its thickness should be at least 8 cm, because the insulation material rather thick plate. Creating a framework setting first piping around the room.

Next, attach the beams across the room. Step therebetween are selected, considering the width of the insulation plates. Timber placed at intervals that are slightly smaller than the width of the mineral or glass wool. Then the sound insulator will hold the most reliable.

3. Laying insulation on the frame

If the owner is able to establish the elements of the frame structure correctly, the sound insulator with a bookmark will be no problems. Plates were placed in the free space, further prihvatyvayut dowels. Due to the fact that mineral wool is afraid of high humidity, to be stacked on top of it and a polyethylene film. It protects from moist vapor, which can rise to the ceiling.

4. Sheathing and finishing the ceiling

Now set the trim, which will act as a surface for finishing the event. To create such a suitable plating, e.g., gypsum board or OSB boards. They are fixed to the frame by means of screws, joints further shpatljujut remaining in the skin. On the ceiling can be further put a variety of finishing materials. Fit wallpaper, paint, adhesive tiles, cladding panels.