Sharpening a knife by means of screwdriver.

Screwdriver is the most popular tools in our time, because it is largely universal. It turns using it, you can sharpen any knife completely. This method is rather small cunning than common, because they are one.

To sharpen the knife, we need self Shura and ordinary sandpaper. The smaller the grain nazhdachki better. Yes, still need a wide double-sided tape.

Before you begin the process, you need to think about the safety of the unit, it is never superfluous. Wear protective goggles and gloves.

Now, to business.

Sandpaper cut a rectangular piece of a width of 5 cm and a length equal to the diameter of the cartridge your screwdriver. Thereafter, two-sided adhesive tape is pasted over around the tool holder. (Width and length of the adhesive tape should be identical nazhdachki). On the tape pasted nazhdachku itself and you can begin to knife sharpening.

With one hand, hold the power screwdriver and other naturally drive the blade at an angle of sandpaper. It's not very convenient so if you have the grip, it is better to fix the tool.

If you have at hand was not double-sided tape, then you can resort to the glue, I saw a lot of craftsmen, so I do not advise to use this method - because you can ruin the appearance of your tool