Because of this stuff with toilet tank can be continuously running water

One reason for the continuous leak from the water tank into the toilet bowl is the appearance generating on the rubber insert inlet mechanism (photo 1). Petite little thing, why so it is not visible. But if you understand where it is located, there is a chance of leaking handle.

Where to look for a rubber liner

If the water in the tank is constantly murmurs because of stubborn gum (Liner), then place the infiltration of water and it is necessary to search. For example shows the position of the insert in one of the inlet side connection mechanisms.

Here on this blue nut on top from the bent lever is continuously beat fountain.

I have to unscrew the nut hand, disconnect the red adjusting screw and take off the lever with the blue nut.

At the upper end of the lever seen in a cylindrical thickening inside of which is water permeable gum.

After several years of service rezinochka deformed - It appears to dent - and is no longer completely cover the hole a valve cover through which the water flows. This is the cause of the problem.

What can be done

The easiest option - flip gum vice versa and look at her other side. If it is flat, you can try to put it up, but if there is some kind of factory recess, then we need to find a replacement, or to buy a new intake mechanism. There could be as lucky. But worth a try, maybe work. If desired, you can even try to carve out something such as gum. So experiment.

Evaluate material andsign upCanal.

It is also interesting:

How to bleed all the air from the radiator when removing and connecting

Bellows hose for gas and water. Find 6 differences

Pasted wallpaper with overflow, baseboard did not touch - like anything