As a self-applied liquid wallpaper on the wall

Contact with liquid wallpaper in the decoration of the walls is relatively straightforward. And every owner who wants to put them on the rough surface of the well, deal with it on their own. He can only repeat technology, which is offered by professionals.

1. Preparing walls to works

Despite the ability of liquid wallpaper to partially compensate for surface defects without training still can not do without. Its essence is that a reason to remove old rough materials, pollution and all the crumbling plaster. If necessary, the surface is degreased and then applied leveling compound.

Covering the usual leveling plaster the wall is not necessary. The main thing - to get rid of most major defects. After drying the plaster additionally applied primer and wait, when it dries and.

2. The application of liquid to the surface of wallpaper

To prepare for the work of this material is usually sufficient to mix the components and add them to the water. The intensity of the color will adjust their own, adding the desired amount of pigment. For applying the composition suitable trowel, roller, sprayer. It all depends on what specific tool is at hand from the owner.

Ideally, the best solution to first apply a spray or trowel, then smooth it even their roller. So unable to save material and at the same time ensure a smooth finish with liquid wallpaper. The layer of material must be thick. It is sufficient that he was only 3-5 mm, but not more.

In addition, sometimes a liquid wall is applied not on the entire wall surface, while only certain portions. And to implement this method just does not dispense with the spatula. In an extreme case, a brush, using which it is possible to form an interesting pattern on the surface. At least, if the owner of enough artistic abilities.

3. Additional protection liquid wallpaper

When finishing work is carried out in a kitchen or other room with difficult conditions, on a layer of liquid wallpaper better additionally applied transparent lacquer. To begin this procedure, when the material is applied before completely dry. Also, it should be primed and then carefully apply varnish roller. Now liquid wall will be protected from moisture and mechanical influences.

Such events, as you can see, are not connected with great difficulties. After spending them correctly, the owner will get a finish with excellent performance.