Flush the gun foam agent for lotions
And this is not the first encounter with miracle drug under the name Dimexidum. I thought his life has been exhausted, but suddenly found a new use.
Who reads the channel on a regular basis know that am now working on installation of PVC windows, Which is trying to write in stages. But as quickly I wanted zapenit already installed frame, waiting for me dried up a surprise - gun barely grunted a couple of times and even stopped. It seems to be, and not lying for a long time, and yet dried up. Because he's only six months, immediately decided to revive.
Remembered that successfully rubbed Dimexidum old foam with Lutkov and immediately I decided to try his luck on the "frozen" gun. First, a thin screwdriver and tried to dig a cotton swab and clean all accessible residues in the foam pistol adapter. Then Dimexidum poured into a plastic bottle with a thin nose out of printer ink and squirted into the adapter.
Liquid inside she did not go, because the spring-loaded bottom prevented
ball-valve. When otvertochkoy pressed it down, then Dimexidum by little began to seep inside. Poured while leaving, then I put soak for 15 minutes, bending tube-barrel down a bit.If the same tool dried up a long time, even for a couple of hours you can leave, I think.
The day was over, he could not wait any longer. A quarter of an hour shustrenko clocked Balon foaming at the gun a bit and let the regulator hopefully pulled the trigger. About a miracle! From the nozzle after a slight acceleration raced a powerful jet of foam - all as before!
Perhaps I was just lucky that the foam is not so much dried up. Who knows what would have happened if the tool used more in a few months? But if again uslezhu and dries stronger, Dimexidum sure to check back in. In the meantime, I can say that trying to clean dried-gun in such a way worth it. Harm will not be exact, the use of - fact.
Evaluate material andsign upCanal.
ANDit is interesting:
Installation of PVC windows. How to pull №3 glazing beads and glazing
Installation of PVC windows. Remove flap № 2
Installing PVC windows inside and out. №1 screwed handle