Three surprises for mounting a plinth on the same object

After pasting wallpaper with a partner three rooms, the owners suddenly and urgently asked to install 40 meter plinthWhat we agreed to, but decided to turn it on the next day. Jobs familiar, but not without a trick. pre-ordered 150 plug-in driven nails 6x40 mm and quietly went home.

In the morning spread dowels and nails on shlopkam, as it seemed that it is very convenient - do not crumble, do not mix, do not lose sight of, and do not fall under the knees while working.

surprise 1

Start eventuality put the owner, who said that the walls of the house built of adobe and slag, which meant that dowels 40 mm for such walls not suitableAs would povyvalivalis. They had to be replaced immediately by buying fasteners Genuine - 6h60 and 6h80 mm (photo 2).

While drilling mud walls easily, the hole in flaking, and it makes it difficult to insert the plastic anchor. To fix costs to drill holes deeper and push the dowel into the loose material.

surprise 2

The second surprise came after the realization that in the same room will have a plinth

cling under heating pipeUnder which the dimensional puncher places do not crawl (Photo 3). And I found out again! This time thanks to long drill, Which fell to an object by accident, or work in this area had for some time postponed to locate a drill.

A little earlier in the store reluctantly bought a long perforating drill diameter 6 mm. Since no other available was not taken on 210 mm (5 photos) although usually 110 mm enough. Short with a drill lucky! In view of such an incident is now the drill will keep in the box all the time.

surprise 3

Although it seems that recently the laid laminate lies on the plane of the floor rovnenko, but the fact he repeated in many places small surface deflections, causing between the skirting and the floor were formed gap of 5-7 mm. To eliminate them, he had a hand like image 6, first press down the plinth to the laminate and then drilled, installing anchors into the neutral position.

Since the flexible baseboard, do it was not very difficult, you need only the baseboard trim and drill out small holes so that it then because of the backlash does not spring out upwards.

Despite the roughness of the work handled approximately 4 hours. For fixing mainly used dowels 6h60 mmAnd short 6x40 mm went only installation frame outer corners (2 pieces at an angle).

By the way, dowels in slippers - really handy thing!

So, my friends, and in a familiar fact happen nezhdanchiki that the forces to be ready for such an eventuality and prudently possible.

Evaluate material andsign upCanal.

ANDit is interesting:

As the mixer bring to such a state. It has a secret

Now the key to the drill is not to lose 100%. A small trick

Custom finger joints repair broken chairs