How to assemble the interior walls of the lining
wooden wall paneling - material truly universal. You can use it not only to sheathe the walls and ceiling, but also build complete interior partitions. This design belongs to the group of frame. Actions that need to perform to the owner, the particular complexity of the same. But as the technology looks like exactly?
1. Preparing the framework for walls
The first owner, apply the layout. Its operate a double line with an interval of 10 cm. The marking shall be affixed to the walls, ceiling and floor. With its help indicate how hereinafter be located carcass rail.
After application markup collected carcass structure itself. For its assembly can be used an ordinary wood beam, a thickness of 8-10 cm. It is laid on the markup, fixed mounting anchors or longer screws.
The next step - setting uprights. They are made of the same timber. To better harness rack secured with metal corners. To make the frame more rigid bridge between the posts placed at least in a few places.
2. Laying an insulating layer
Although the lining has some good sound absorption qualities, it is not necessary to do without additional insulation. It can be performed by using mineral wool. Slabs of mineral wool are laying in a free space remaining between the carcass elements. Plates material prihvatyvayut brackets to the beam. It is important that nowhere were slit, because due to their insulation level drops.
3. Installation of the wooden lining on the frame
Now sheathe clapboard first one side of the frame, and then another. Horizontally disposed panels, attaching elements to the frame structure. Panel equipped Paso-ridge system securely fastened together. Therefore, in such a partition there through the slits to provide a more extensive soundproofing.
4. Finishing decorative works
To make such a connecting septum more aesthetic appearance and further protect it on battens applied paint or lacquer. Its pre-primed. Of course, you can leave the wooden battens and in its original form. But then the service life of the partitions will decrease significantly.
In general, nothing complicated in this work there. Only the owner must remember that to mount the partition of the lining in high-humidity areas is impossible.