As a self-sanded parquet

Parquet and today is used as a finishing material at floor repair. This product has an interesting appearance, withstands heavy mechanical stress, provides a favorable microclimate in the premises. But over time, flooring still wear out, so you have to bring it in order. Return it to its former usability can be, having spent grinding.

1. Preparation of the necessary equipment

Currently, polishing is carried out manually, as for this, there are special grinders. The equipment does not need to purchase because there are companies who rent it out. Well, if the owner immediately take the plane and angle grinders. They solve different problems. The first requires grinding the main area flooring, is applied to the second processing wood at the corners, and on the perimeter of the floor.

2. Preparing for parquet works

Not to harm the equipment, first remove metal fasteners that may stick out of the flooring thickness. Remove them is not necessary, since it is sufficient only to deepen the self-tapping screws or nails in thickness of wood. Still need to make sure that the floor covering no more dirt, rock dust, sand, and so on.

3. Rough grinding parquet

The purpose of this step - from the upper timber to relieve worn layer. Therefore, using a grinding machine, which is set coarse sandpaper or a large knife. The owner must immediately take into account that after the rough grinding parquet absolutely will not. But on the surface there will be worn layer and the previous finish.

4. Repair of parquet blocks

Due to the rough grinding is possible to identify defects that have appeared on the parquet floor. For example, some panels may be covered with mold. Yet they often cracks. Between adjacent elements formed slit. From all this you need to get rid of. Spoiled strap change, cracks and crevices filled with filler for wood.

5. Finish sanding parquet

To finish grinding will need to install a fine nozzle on a grinding machine. This element does not injure the wood, but does parquet perfectly smooth, and at the same time it eliminates the excess putty left over from the previous stage.

This allows you to update resurfacing flooring and prolong its operational lifetime. Owner remains to be decorative works using varnish, paint or protective impregnation.