Sharpening grinder hacksaw. A little patience and the new
Yesterday was the "day saw": first do wiring teeth and one still broke off, and then executed sharpening grinder - is repair so repair. About tricky wiring pliers was a separate post (link below), so there is only sharpening.
Perform sharpening it is most convenient in the grip, but I tried to do everything without them. Not so easy that, but it turned out.
For a particular position for sharpening can not advise: twisted hacksaw so and so, but I realized that you have to make 4 passes. I thought two handle, but at times it turned out to sharpen only one facet of a single tooth.
Went first in one direction through one tooth, then the same teeth sharpened on the other hand, and then turned the tool on the return line and repeat the operation for the other half of the teeth.
Point angle obtained somewhere in the range of 35-45 degrees. I liked that it although it requires precision and a little diligence, passed rather quickly, can not be compared, of course, to a file, which also helps well.
Just do not tell, but it may be worth it to make a first grinding, and then the wiring? If anyone has experience, prompt.
After turning teeth are slightly more aligned in form and sparkling, could only try a hacksaw on a tree. Found for this experimental piece sill 50-60 mm thick and walked on it with one hand (left-handed because). I do not know how this saw to cut, when it was new, but I liked her gnawing ability.
Already there is basting in the same way to normalize another hacksaw, which somehow had to urgently cut the clay and adobe after she became very thin. Friends, in general, I recommend the way only painting is still better to fix.
Evaluate material andsign upCanal.
ANDit is interesting:
Hacksaw tricky wiring pliers
How else to protect inexpensive wallpaper? corners only
Painting the walls at once. doable