Simple way to attach a ceiling lamp on the short wire

The lamp has got excellent, not cheap - metal lampshade Solid plinth, carried on a 1.5 square with a margin within the standard complete terminal - in general no issues. But!

Hanging lamp fell on the old aluminum wire sticking out from the ceiling of only 4 cm. After his training length has decreased slightly.

Insert such cores in conventional terminals would be difficult, so I decided to find other with springy contact terminals, designed for two wires (3, 4, 5 wires) which previously heard, but did not use - Wago, Germany. they cost me by 18 rubles apiece.

**Picture 3. It looked like a new lamp before installation.**

Native terminals I took that did not take place, and a wire shortened by half a meter, and then he, too, would not fit in the small cap. After that took a couple bought Wago terminal and connect them to the bare ends of the wires of the lamp. After all operations all looked - Picture 4.

Terminals can be used repeatedly. Two pressing work independently. Easily raised and lowered.

instagram viewer

Next move. Took the lamp mounting plate and attach it to the ceiling in the pre-prepared holes in the two self-tapping near the exit wires. After that could only connect the terminals to the ends of aluminum wires on the ceiling.

It is very convenient and fast, just need to clean up the wire around 1.5 cm, as he comes deep into the terminal.

Well, now matured very light with a short wire. To do this, perching on the cover bolts that at the ends of the mounting plate and the attracting of it. We get a result that's such a composition.