The main methods of fixing the wall panels

It will be called a lot of advantages that are present in the wall panels and allowing them to be incredibly popular. But the most important advantage of the product is easy to install. Moreover, there are several options for mounting the wall panels on the rough surface. Below are the most common, which can realize the owner.

1. The adhesive method of laying panels

Suitable for situations where the original wall perfectly smooth. For example, you can refer to the adhesive method, if the owners just moved into a new apartment. In these dwellings is conducted at least rough alignment on the walls do not have significant height differences.

The essence of the procedure is that the back side panels is applied to the adhesive composition, after which the elements are pressed against the walls, smooth and retain at least a minute. The procedure takes a little time, eliminates the need for minor expenses. Although, if there is even a slight unevenness, reliable and aesthetically pleasing finishing material to fix will not work.

2. Fixing the wall panels on the screws

You can refer to this option if there are small bumps on the walls. On such a surface material paste difficult. A self-tapping screws allow to fix it the most reliable, so in the future will not be deformed cladding.

Screws driven directly through the pane and prihvatyvayut to the walls. But the owner should immediately take into account that this method leads to serious injury to the walls themselves. And when you need to carry out repairs in the next time, rough plastered base have thoroughly to get rid of any remaining damage.

On the screws can be attached only to the rigid panels. For example made of MDF or wood.

3. Mounting panels on the carcass structure

In the role of a basis for the wall panels can act as a framework that is collected from the beams or metal rails. The advantage of this method is that the frame compensates the strongest irregularities on the walls. Between rough ground and lining remains free space that can be used to lay the insulating layer. As for the drawbacks, the most serious of these is the thickness of the finish. Usually it lost most of the useful area of ​​the room.

Now the owner can focus on the best option, taking into account the characteristics of each of them. All fastening methods are practical, if taken into account their specific features.