Make a frame for the ceiling of the plastic panels
Even without much experience in similar works, the problem can be solved personally. The main thing is to do the work without haste and carefully as the quality of the crates wakes depend on the quality of the entire ceiling mounting.
Lathing on the ceiling under the wooden slats PVC
mounting Features
To get a quality profile and the installation of panels there are no further inconvenience battens should be flat and smooth. slats size may be within the 20 x 30 mm, but preferably not less than 20x20 mm. It is important to monitor the quality of the tree, as after installation, it will be difficult to dismantle the damaged rail. The distance between the laths should be 40-60 cm.
1. Before installation, the tree should be treated with antiseptic. This is especially true for rooms with high humidity (bath, toilet). After processing and drying, exploitation material time, will be more durable.
2. Around the perimeter of the room on the ceiling mounted extreme (basic or guiding) rack. They will form the basis crates. Fastens wood screws, step between them should be 40 -45 cm. Throughout the process, you must use the level. Whatever may be mistaken, it is better to do the layout and carefully measure all future frame member, using a tape measure.
3. Further mounted transverse frame elements. They should be placed perpendicular to the plastic strips. The distance between them should be 40 - 50 cm. Are attached to the main long screws 50-60 mm, and a ceiling suspensions short (20-30 mm) every 60-70 cm. That hangers provide additional fastening providing reliable design and protects it from sagging. Care should be taken that would cross rails are installed parallel to one another.
4. By using plastic furring possible to correct all the irregularities in the substrate. To this end, if the rails are mounted directly to the ceiling, under which it is possible, enclose extra padding of any matter (plywood, wood). The remaining space between the ceiling and can blow out a tree foam or foam repaired. But this is optional.
5. At the end of the installation be sure to secure all elements of the framework. The well-mounted profile, plastic mount is much more convenient and faster.
Advantages and disadvantages
The advantages of a wooden frame:
Ø tree - an environmentally friendly material, which is a big advantage in comparison with other materials;
Ø low cost;
Ø soft material, easy to adjust to the desired size.
Sure, there are drawbacks:
Ø substantial period of time;
Ø material not rot - even after careful processing may eventually come into disrepair;
Ø well-lit;
Ø depending on the type of wood can warp over time.
Crate made of plastic
Installation
Lathing on the ceiling under the PVC plastic, as a rule, more expensive wooden frame. Elements of the plastic profile, you can buy in the store with all the components of the ceiling coatings. When mounting this material requires a flat surface. Before installation, align the base as best as possible.
The plastic frame elements equipped buckles and clips, which combine to form a fastener in the form of lock.
Along the perimeter of the room, the ceiling set the basic framework as mere transverse slats will not be enough. Next, fasten the rails. Keep in mind that all cross-plastic frame members should go to perpendicular to the plastic panels. Otherwise, if the assembly does not match fasteners, and the entire structure will have to be dismantled and re-start. Lathing the ceiling of the plastic element under plastic panels, typically used in small spaces where the use of wood is not important because of the high humidity (baths, saunas).
latch mechanism and a clip, allowing not even a trained person to cope with the task quickly.
Advantages and disadvantages
The advantage of the profile:
Ø does not rot and will not start a fungus;
Ø resistant to moisture - no need to process antiseptic agents;
Ø high speed of assembly;
Ø Easy to assemble.
The downside is the price of the product profile, which is slightly higher compared to the wooden structure.
The frame for the ceiling of plastic with a metal profile
The nuances of installation
Crate ceiling under plastic panels of metal profile, is substantially similar to the frame under the plasterboard. Because of its high cost, this type of profile is used quite often. For manufacturing carcass bands used aluminum or galvanized metal.
Installation is carried out in several stages:
1. According to the perimeter of the ceiling, using a builder's level, mounted U-shaped profile.
2. To it are attached guide elements with openings for the plastic fasteners.
3. These same guide strips must be secured to the ceiling by means of screws, with the step fixture 70 cm.
4. After that attaches plastic corners, corners, etc.
Advantages and disadvantages
An advantage of the metal frame of wood and plastic, is its strength. It is possible to use a metal as the main frame profile along the perimeter of the room and secured thereto, a less expensive, plastic or wooden transverse profile. Such a composition wakes combine reliability and low production cost.
The disadvantage of such framework is its high cost in comparison with its wooden and plastic counterpart.
Output. The frame on the ceiling under the plastic can be made with different materials considering the possibility and complexity of the project. Perform all work slowly and calibrated.
Rate this post andSubscribe to the channel.
Read with interest:
Table-side table in the kitchen. Budget Project. Rate it!
Slopes tiles in the bathroom. Rate it!
Facing ceramic tile pallet