Transit ventilation bathrooms. Convenient access from the master Ok!

A new piece of content to enhance the experience!

Friends, followers, and for the first time to visit my channel! You all know the price of comfort and look for an easy way out of difficult situations. You the way to solve the problem of the lack of ventilation in the toilet. There are also easier on the situation where the outlet from the toilet goes into the bathroom and therefore unpleasant smell gets into the bathroom first, and only then goes to the ventilation window.

The shown work is done some time ago, photos demonstrate why the system as a finished product. However, some details still displayed.

The process is applicable even when the repair has been completed, and no you do not remember, nor the builders are not prompted for ventilation.

Before us is a case where the bathroom and toilet shared wall, but no toilet ventilation duct and it seems to have nowhere to go. We will pave the communication to the short window of opportunity that the room bathroom.

Necessary materials

1. Plastic pipe square - 1.5 m

2. The angle of 90 degrees under the pipe size. - 1 PC.

3. Tee with ventilation grille - 1 pc.

4. Ventilation grille - 2 pcs.

5. Decorative cover with an aperture for an outlet pipe - 1 pc.

nuances perform

1. Approximately at the same level, which is an outlet in the bathroom should be to make a hole in the toilet. This is best done through crowns with diamond coating, attached to the drill. To increase the size of the hole, it is necessary to drill the wall twice, performing holes one above the other. Then the size of the square tube additionally knock off everything that hinders her to go inside the wall by a few centimeters.

2. Since the other end of the pipe comes into the outlet that the bathroom, under it is also possible to buy a special lid with a hole. But this time was chosen conventional ventilation grille, in which a hole is cut by hand. Since the exchange of air in the bathroom even more improved.

3. We are putting all the parts together, while inserting the tube into the tee with ventilation grille.

4. Must not forget to seal the lid on the outlet in the toilet.

5. From the side of the toilet mount another jail.

Here's a simple procedure. I would be grateful for ratings and reviews.

Please vote and post Subscribe to the channel"

Also read:

The new trend in the finishing slopes

Slopes tiles in the bathroom. Rate it!

Guess which of the heel? Do not believe it!

Facing ceramic tile pallet