Put in the toilet hidden hatch, guests can not find our boiler - made himself

Lyricist: Shcherbinin Dmitry, Oikodomeo team

I want to write about the use of flush-mounted hatch for large size tiles. To begin with, why we decided to install it. We bought an apartment, where the separate bathroom and toilet is narrow, but long. To reduce its visual and hide all the plumbing communication, we decided to install a hatch concealed installation.

How we chose the hatch flush mounting

We've set at the bottom installation, and the top has a hatch. Choosing the door, I took into account:

• Dimensions - I is 100x50 cm. Initially we had chosen boiler flatter model, then we have already measured and repelled by these dimensions. The whole point of this hatch to remove the boiler and replace it if necessary;
• opening the way to - I have a push mechanism with the closing of the top and bottom;
• Possibility of 3-D adjustment - we chose this possibility, since it allows you to adjust the door even after installation;
• The material from which made the hatch - we have a metal plate and GVL, which then glued tiles.

How is a hidden hatch

To install the door in wall mounting, first of all you need to build a wall or frame, which will act as a base. Next, a sunroof and fixed mounting bolts. Once installed on the plate GVL glued tiles, cut to size in advance.

Before you stick the tiles, it is necessary to hang the back of the same load, the tile was put on a level, and the door was not visible and is not twisted. After the tiles had dried, the hatch can be opened, and the goods additional rent.

Ease of our hatch in the fact that it is fully painted and the opening looks nice. We ordered it online with delivery by mail. It weighs a lot, about 15-20 kg, can not remember exactly, it all depends on the selected size.

My opinion after OPERATE hatch concealed installation

Renovated two years had passed, the door was very convenient. All guests immediately start looking for where our boiler, which we have for the door, because it is absolutely not visible. Luke is very convenient to open, and after two years, we were satisfied with its use.

I want to say that if you select does not need to save, because the failure of the hatch quite fraught. Discovering a hidden hatch, you can immediately see and boiler, and all communications - it is very convenient. Now the boiler is not hanging over our head, and does not interfere with the dressing-room visit.

How do you like the result? And where do you hide your boiler?

Share your opinion in the comments.

We read all your feedback and participate in discussions.

Do not forget put Like and subscribe our useful and interesting channel. Cosiness you peace and warmth in the house!