Welding in the pocket: a pencil for cutting and welding apparatus without electricity and 20 seconds

In the repair of metal products do without welding. What if there is no hand welding machine, and the problem to be solved urgently for a few minutes? In this case, help welding pen. This pencil is called thermite.

Compact, it fits easily into a pocket. Now you do not need expensive equipment to seal any cracks or holes in the metal.

Apply a pencil can be in the dead of winter, hot day, even when there is rain or strong wind.

No need to connect to electricity. Welding can be performed at home or in the street.

Pencil used for repair in extreme conditions, for welding copper wires, temporary emergency repairs radiators. It is also possible to close up any chips or cracks in products from cast iron, porcelain, bronze.

It may be used for temporary road repairs, as well as repair of slate, water pipes, ceramics, brass, copper, steel and so forth.

Pencil will be useful to the country, handyman, travel, fishing for small repairs. A pencil can be used to

25 times. Brazing can withstand heating up to 160 gr.

How to use a pencil welding for welding and cutting?

Wear canvas gloves and safety glasses. Although some do not use protective equipment at your own risk.

Cutting ignited pencil and carry them smoothly along the cutting line. For example, this situation occurs. You have lost the keys. The castle is now not open without breaking it. A pencil can be cut even with a thick lock shackle:

No need to initially prepare the surface. It can be applied even on rust. As part of the goods are oxidizing fluxes - there samozachischenie surface. He will need a pencil and a lighter. Hold the lighter a pencil. You will see how it starts to melt slowly. Explicit fire will not.

Molten pencil end must be applied to the repair site. Pencil extinguished itself. The entire mass adheres to the surface. Now it is important to wait at least 15 seconds to metal warmed (to 400 degrees).

You will be able to see the spark in the process. Then the same pencil to produce welding (just smear on the surface). The remaining aluminum on the surface is soldered. Place the metal seal, if desired, to clean sandpaper.

pencil cost from 140 rubles.

Channel RemontDom: SUBSCRIPTION. We would be grateful if you Like.