Transfer the image to paper on a tree
Greetings to all Kulibin, diy and other rukodelnikov) I will not make lyrical introduction and tell it where to use and where to hang out and immediately proceed to the description of the process.
Choose a beautiful image and no less beautiful framework in the form of Boards can be used thick plywood or even cut a piece of OSB boards. Print images to a printer, pre-fit it to the size of our base.
It is important that the image is saturated, black and white or color does not matter. Cut a leaf the size of our fanerki so that sheet profit slightly smaller than the plywood, it is literally a couple of millimeters.
Next, take an ordinary PVA glue, but not one that children use in the garden, but a normal construction, otherwise byaka work.
Smear glue on dostochku and paste leaf image to the board. The layer of adhesive must be such as not to chvyakalo and simultaneously to leaf can be moved by Dostochka. Then give the glue to dry thoroughly.
Only it is important that the glue was dry naturally, then there can not be placed in the sun or under the fan, so that the paper is wrinkled. And yes, carefully ironed to avoid air bubbles.
When the glue has dried, take the ordinary sponge for washing dishes, wetted with tap water and gently begin to wash the upper paper layer. Occupation is not quick, I should say, but here it is impossible to hold to erase the entire image.
And so gradually rolls down a layer of paper with a wet sponge.
Roll off until until the image will be shown as shown in the photo.
Then give the image a little dry and cover acrylic clear varnish. It may be possible to use another nail, but I used acrylic.
This varnish impregnates a thin layer of paper and exhibits good image, but there really is very visible structure of wood in the background. as for me, so even more interesting work.
Well, in general, think for yourself and experiment. You can apply matt varnish, so that the picture is not Lambent. The board can be used without the wood pattern, and you can probably dostochku pre-paint to set a different tone base, but I did not try to paint.
That's how it was. Well, as usual, hmakayte Like and subscribe. So you need. And who is now easy? ) 😄