Altai warm wooden house developed a new generation of home

Material for this article providedtechnology developers.

In 2016, a unique technology of construction of wooden houses in Russia - "Altai Warm House".

The essence of technology lies in the fact that not even the most experienced builder of absolutely standardized material was able to build an inexpensive but really warm and eco-friendly wooden house. Technology "ADT" solves all these problems.

The technology is based on the use of two types of boards - wide 40mm x 160mm x 3000mm and a narrow 40mm x 40mm x 3000mm. Of these walls are created so that each layer consists of a narrow wall boards and the general board and between these boards is a hollow channel. (See figure)

Mounting the surrounding boards occurs between a 70 mm nails. For sealing end connections used gernitovy cord. Strips of fiberboard used in the grooves help to ensure high accuracy and quality of the construction assembly. Additionally they increase the seal between adjacent layers of the boards. In each of the next layer are narrow and wide boards are swapped, creating a strong bond between the layers of structure and increasing overall strength.

Thanks to all of the above factors Altai Warm House turns incredibly durable and earthquake-resistant.

The width of the internal partition is 160 mm and they are also constructed of the narrow and wide boards.

Due to the peculiar structure can create different versions of interior and exterior decoration by changing the profile of the side edges. The design "Altai Warm House" in its thermal protection meets all requirements SNIP 23.02.2003 and head bypasses all the other kinds of wooden construction. For example, 28 cm wall built on technology "ADT", for thermal protection equal to 85 cm walls of pine timber or 380 cm of bricks. Heat conduction simulation is on our website Altai-dom.rf

Advantages of the technology "Altai Warm House"

• The outer contour of the wall is very warm;
• The incredible strength construction;
• "Altai Warm House" design dimensional stability;
• Standardized components;
• Ease of fabrication of components;
• Simple construction assembly;
• Low cost stenokomplekta ADT;
• Minimum area ends promotes durability of the structure;
• During the connection is completely sealed assembly;
• No additional finish both internally and externally;
• Strong partitioning and their connections with the wall;
• Energy efficiency of timber;
• It is possible to implement hidden wiring channels in the wall;
• It allowed combining different species of wood boards in construction;
• You can create complex for the wooden house components.
• Compliance with SNIP 23.02.2003.
  
  
  

For more information and contacts at the official site - Altai-dom.rf