Water tank + punch: did everything for 15 minutes at 450 rubles

We truckers are often problems with water for watering the garden. Not everyone has the opportunity to connect to the water supply or well done, well. Saves water tank. Today, we tell another idea, but expensive to make such a container garden.

By the way, if in a tank of water for the winter put a long stick, it does not break when the water will turn into ice. By stick ice crawling up and does not press on the barrel wall.

Is on sale for water storage containers (plastic, metal). Over time, the metal tank to rust, crack the plastic.

If you want to save, then we can do a barrel roll yourself out of simple materials. For a film and the mesh netting.

First you need to put on a flat surface of the geotextile. Roll out the metal grid on the ground, held her on both sides, mark up. For example, the diameter is 900 mm. Height 700 mm. Measure out 2850 with 2 sides and cut the mesh metal scissors.

The fastening of the net with nahletom 100 mm. with plastic clamps. Wrapped on top of the tank wall stretch - film or geotextiles.

On top of the edge of the grid paving thermal insulation for pipes. This is necessary for the further work. You can do it from the bottom and that the bag (pot) was flat.

Now you need to make a sleeve made of polyethylene. Bottom sleeve to tighten and fix the plastic strip, so that the fluid does not leak from the bottom.

Inside the container laid a plastic sleeve. Fold the outside edge. You can fill it with snow to the spring was meltwater. If you pour water into the tank in the summer, it is possible to gather the top edge of the polyethylene so as not to fall leaves, and various types of garbage tank is always clean water.

In autumn, when watering is not necessary, can be removed and put in the polyethylene container leaves, grass and food scraps into compost. This is an excellent alternative to metal barrels and other containers for water.

All materials are available for the tank 700 mm high. only need 450 rubles.

you can do More tanks. But remember that the diameter of a barrel should be greater than the height. Polyethylene choose no less than 200 microns. On the tape, it is better not to save.

Channel RemontDom: SUBSCRIPTION. Thank you for watching and please Like. Thanks and all the best!