How not to get in the wiring when drilling walls. Without the use of instruments
A simple method gives 100 percent result when the blind drilling and 50 - 70 percent by drilling through the wall. Recently just passed the wall, using this technique, which he volunteered as an assistant at the beginning of such activities.
The method
It's simple to the ridiculous and, most importantly, do not need special expensive instrumentation.
It should be a screwdriver in a circular motion gently dig up the plaster to the stone and if it is not discovered by the wiring, you can safely drill. And it should not be rested periodically to check whetherthe sting of a screwdriver in the cable insulation. Screwdriver should be gentle (blunt) edges, if there are sharp edges should be blunt with a file or sandpaper.
Of course, when drilling through is likely to hit the wires on the opposite side, but if you choose a place focusing on the boxes, then hit the wire a multiple reduced.
Unfortunately, this method is applicable not everywhere, but only where the wiring is under the plaster!
himself repeatedly used similar, and never got into the cable, so that those who did not know I recommend this technique.
subscribe to the channel, Share the publication with your friends, like, put Like, soon a new article. Your home renovation.