How do Rabitz PET bottles. My 2 attempts
I had no intention of making netting for today's specific application, I was interested in the process of making himself, for later use at a royal farm in the village.
First try
Based on the foregoing, I just I faked and not do a complete template for weaving nets. I took riveted from the bar hangers and using hair dryer building, oplol plate two tubes made from PET bottles.
metal strip strongly basked, what first, Created problems in her hold, second, needed time to cool down for removal of the formed tube, and third, She was too thin and thick pipe. The first experiment failed miserably!
The second attempt
It is understood that We need a normal, full template grid coils made it and wooden, meter boards.
Struck at her markup slug pierced and hacksaw to grind with a file for the guide troughsIn which the pipe will be laid in pet bottles, folding it will form a hairdryer. It went more cheerfully, and this method worked.
Result
He produced a three-wire and two-well splol, the first workpiece is to be mounted on a wooden plank and then woven into second for a full weave.
Also two blank edges bonded to each other, and are hung on the bottom Booting after they are outweighed by weaving again on the bottom. We continue until such time until you get your desired mesh size.
This grid will fit for the internal partitions of the yardBy the way, it can help to create modules on the frame, which can also be made from PET bottles. I must say the idea is taken from the network and checked me empirically.
Therefore, who are interested in my experience, subscribe to the channel or group VCNot to miss the new articles on this and other topics, Like putYour home renovation.