Useful content

How to make a pipe from a plastic bottle, and where it can be applied

click fraud protection
Tube from a plastic bottle
Tube from a plastic bottle

Saw on the Internet pipe manufacturing process of a strip cut from a plastic bottle, decided to repeat and share their experiences with you.

process of manufacturing

For this I needed a hair dryer, PET bottles, wire and the base on which it is required to wind, then a screwdriver, but possible to use nails suitable diameter. As well as pliers to hold the twisted spiral on a hairdryer at the time of manufacture.

Tools for manufacturing
Tools for manufacturing

Cut the ribbon on butylkoreze, width required to pick up a spiral on the inner circumference wire. I did not bother and did everything empirically to obtain an acceptable result.

The tip of the tape cut so that it passes through an opening spiral, then grabbed her a pair of pliers, a hair dryer and began to broach. It turns out one edge tape pull, and she, heating hairdryer, enters the spiral of wire, forming into the tube.

How to apply the resulting tube

Finished tube PET bottles
Finished tube PET bottles

Since the tube has acceptable flexibility and a fairly strong,

instagram viewer
people weaves one basketUsing instead of vines, and also It makes a variety of souvenir crafts.

And most interestingly, saw from it make RabitzAt the event check and show you how it happens next time. And I was interested in a hammockMade from plastic bottles, ribbons, but to him, I have not got.

Put huskies, share with friends and subscribe to the channel! Soon on this topic will be a new publication, your home renovation.

How to make a simple butylkorez plastic bottles

Two ways to fix the screw in the wall if the hole is loose

Two ways to fix the screw in the wall if the hole is loose

Hello everyone! I think there is hardly a person among my readers who does not use ingenuity to s...

Read More

How to choose the cross-section of wires for sockets and lights (# electrician's advice)

How to choose the cross-section of wires for sockets and lights (# electrician's advice)

In order for the wiring not to fail after the very first start of the iron and other electrical a...

Read More

Profile template for complex contours in a minute (and by the way, it's free)

Profile template for complex contours in a minute (and by the way, it's free)

- Nikolay, welcome. What are you inventing again?- Hi, Vova. I started repairing, I need to make ...

Read More

Instagram story viewer