2 process to clean the thread of rust. Which is better
Often there is a question of cleaning the threads of the bolt or stud, people come up with home-made, can cope with this task. But there are two simple ways that experienced today, and even chose the winner.
method one
He is clean-thread disk brush on the metal, which is attached to a drill or screwdriver.
Planted on the disk brush screwdriver, pliers clamped workpiece and become clean, the result will not take long, reverse and switched on the thread appeared cheerful glow. Good, all of the second method.
The second way
He suggests to clean the threads cut at an angle nut samples.
Sawed nut LBM and began to wind it on a rusty thread, it only clears away slug rzhu decided bend her hammer for more intimate contact with the pin. The result is improvedBut the nut was reluctant with great effort, I had to make great efforts.
Determined by the result of the winner
As seen Leadership deservedly occupies the first method,
thread completely cleaned to a shine. The second method also gave the resultBut in the grooves visible rust.Advantages and disadvantages
- Cleaning brush leads to a rapid and perfect effect, but at the knee it is not done, you need to buy.
- The adaptation of the nut to make simple, but it takes longer to work, without a complete cleaning of the surface.
Output
The experiment showed that both methods work, but the best cleaning is achieved by the disk brush!
Put huskies, share with friends and subscribe to the channel! Soon on this topic will be a new publication, your home renovation.