How to mount the antenna and to connect the DVB-T2 via console. My experience
prehistory
7 or 8 years ago already I had the experience of connecting the antenna and set-top boxes T2 to an analog TV. Then all were in vogue Polish-wave antenna amplifierNicknamed by the people "mesh or grid."
big disadvantage of this antenna was frequent failure of the amplifier after a stormWho was treated for his replacement. And it was important to send the device to the repeater, but with the advent of Yandex maps and information online is not a problem. So, such a "lattice" is situated in the attic dvuhetazhki and connects to the console, and it to the TV, set up and everything.
After another storm broke down the amplifier, then dismantled it, directly connected and cut off the power supply, all the channels have earned, and minus "polka" disappeared.
new connection
Yesterday I also had to install the antenna (UHF) and T2 connect through the console. I knew the direction, but the attic to put it was impossible, as we recently blocked the trapezoidal sheet metal roof
And through it the signal does not pass.It was necessary to mount the rack on the wall through the second floor window. While I connected the cable, rain and hail struck and installation has been postponed until the termination of the weather.
Connecting to a TV
But because the cable was already zavedon the apartment, continued to connect it. Prefixed to the TV for the colors and bells installed the batteries on the remote, and not even exposed to 10 channels dish rack caught out of 27.
When the weather improved, he has made the final cut, there was a 27 channels and 3 FM radio.
To summarize
To receive DVB-T2 to an analog TV, you need a prefix, UHF antenna (ladder) without an amplifier and a new antenna cable.
Put huskies, share with friends and subscribe to the channel! Your home renovation.