How to make a tie from a strip of plastic bottles. My experience

For such ties took strips cut from plastic bottles, link, how to make a simple butylkorez leave at the end of the article.

The whole process

The hole can be burned or heated wire nail

I snapped a streak desired length and burn-through hole on one of its edges. Wrapped object, which should pull the opposite edge of the bent and stuck in a loop and tightened.

You can use a regular lighter, but turbo better

Bent edge clamp and fix it in this position lighter turbo once cut side cutter tip. And you can flame obsadit entire screed for better compression.

The second option

You can use the version of the screed without holesBut then have to make a knot and wrap the two ends of the tie, fixing their flame lighters. experienced way to workEspecially when there is no billet with holes.

Screed on the pipe without hole made knot

Extra ends, too, should be cut a side cutter.

Pros and cons of self-made ties

pros that material free and easily accessible, can to choose the width and the length of the tie.

instagram viewer

minus such ties is the absence of a ratchet lock and the use of turbo lighters to form a retaining angle, and soldering applications to create holes.