Useful homemade. Anvil and vise of metal with their hands

Such beauty can be made from a piece of rail, acquired on the basis of vtormets. Looks like a factory product, but at a price: 25 € / kg..

Anvil always necessary, especially if you have a shop or are under construction on the site. Such as in this photo - hardly suitable for blacksmiths. But something has to bend rasplyusnut etc. - just right.

The cost of the anvil in the stores. The price of the smallest on 3kg - from 1700 rubles. As written above, the parent metal may be found on the basis of vtormets. You pick up the necessary piece of the rail (or ask cut from the eye). B \ y metal they sell at a price not more expensive 25 p / kg. Those. anvil weighing 10 kg, made with their own hands will cost a maximum of 250 rubles.

Before and after. This is not a blacksmith anvil, yes, it is for the majority of the work and do not need. Forging typically weighing from 50 kg. An anvil can be locked on the brackets to wooden bench, high chock. Drill holes for the anchor screws or large conventional drill practically useless. Rail Steel poorly to drilling, as high carbon.

If you can cut a piece of acetylene torch, it is better to do it from a template. And then - to handle grinder with different cut-off circles and nozzles. But you can do only Bulgarian. Better to take in more powerful.

After cutting the excess, grinder need to finish the edges and clean the metal wire attachment, polishing and will not only useful, but also beautiful product.

Drawing for those who want to do everything by size, not putting only their imagination.

This appearance is not critical - can be left as it will. The main thing, of course - the functionality of the product. Over time, all the same anvil covered with rust. But you can base (not working part) with black enamel paint. And there are oil formulations based on old recipes, which prevents the metal from corrosion.

Someone even sell their own made the anvil, an ad on yul. I think that to sell a product more quickly, you need to give it elements of art style: raised pattern, engraving, etc.

If you do not find a piece of rail, the anvil can be made from a length of the I-beam of large cross section. To work with small components is also a good option.

The following products, which come in handy all rukastym samostroyschikam and craftsmen in the workshop and during construction - is a vice:

These miniature vise can be made independently in two hours, having a grinder, and welding machine dres. Except for one of the ordered items: a threaded screw with a large pitch and a similar bushing or nut with the same thread. Out, how to do without this threaded element is - continue reading the article until the end.

This is perhaps the most simple homemade gripe. Another complicated in their construction (except for the threaded parts) - a mounting assembly, wherein the screw is rotated in the movable jaw. There must be a screw fixed locking ring.

Does it make sense to do your own vices? Look at the price of turning the vise of the store. Prices start from one thousand rubles. If you need just a small gripe, it may be no reason to make them yourself.

Prices for holdfast. In principle, the cost is just a little product is not as high. But if you have scraps of various metal welding machine with grinder, but do not want to order a threaded parts, then we see what you can make ...

In this construction, rotation of the screw assembly in a sponge is made by welding the bearing. Threaded parts - usually long screw (or bolt) and nut. But for better alignment, I would add another nut. Or would set just such a long nut:

You can make the rotation of the screw assembly in the jaws like so:

Clearance in the clamp, this design will be stronger, but if it does not matter what suit and a simple option.

If not svarochnika, the vise can be made with the help of a grinder and drill. Although it is not visible - if the nut is welded or otherwise fixed it properly. Centering is performed by means located between two halves of the frame screw.

Also vise manufactured without welding. The screw is fastened to retainer through jaws. Under the bed - centering plate.

Guides for aligning the jaws can be made so.

Homemade gripe from the jack. If a stray old car jack, trim rectangular pipe and channels, some of them in their free time can be made here is a jack.

Frame made from 40x40mm tubes. On the central tube 25x25 (guide) is put on the segment length of 50 mm pipe 30x30 mm, and the sponge is welded thereto (segment sill)

Further welded abutment and the second stationary jaw clutches. Vices are fixed to the table with two clamps. A few possible to fasten screws through pre-drilled holes (if bench worktop wood)

Such a vise should be fine for fixing pipes, angles, rebar when cutting the grinder. Screwing such a vise to a piece of timber or chock - the product is sufficiently mobile and always come in handy at a construction site.

***

Photos taken from public sources, with Yandex service. Pictures

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of interesting information.