How to easily make an angular frame 3D in the home. reveals the secrets

Good afternoon dear friends!

Unusual, stylish and most importantly, enjoy! After spending a mere 2 hour and a minimum of funds for the purchase of material, you will create your own amazing 3D angular frameWhich will not only be the perfect interior solutions for problematic areas of your home, but also to reveal your creativity!

It is no secret that the corner sections, both internal and external in the house the most uncomfortable in their decor. Decorating them requires more attention and ingenuity. But still, no matter design was left unanswered in the interior! And the case with complex sites are no exception! So today I prepared a step by step guide that helps you to "kill two birds with one stone" and decorate the corner and time to spend.

On top of that, you will have a great opportunity to decent presentation of their works of art or beautiful photos!

1.What you need? In order to implement the planned mini-project you need just a couple of tools (saw, clamp, sandpaper meter (Roulette), miter box, a knife) and little material, namely a bar (wood baguette), wood glue, fasteners for the frame, pencil, artificial flowers, white cardboard and photos.

2.Driving and training bars. Following the scheme below, prepare the "cuts" in size offer you. Make them simple enough! Put the bar (baguette) in the clamp and make a cut along the boundaries of pre-sketching them using a pencil and meter. Saw on the planned size of the bar at an angle of 45 degrees. As a result, you get the finished parts 6, 4 of which - a horizontal side, and the remaining 2 vertical sides of the frame.

Grind obtained preform to remove burrs and impart neat form.

3.Assembling the frame. Start portions compound using the adhesive according to the scheme: 21 cm + 21 cm + 21 cm. And then, prepare a second portion of the frame. Those. 15 cm + 21 cm + 15 cm.

Secure the part frames interconnected by means of clamp for strength and reliability dense forest.

4.Gluing together the sides of the frame. between a step of connecting the most responsible party, as it requires maximum concentration and patience. Combine the two sides together to get the desired angle (internal or external). Then mark a small piece of baguette and cut it off, do not forget to clean the cut. Repeat this step with the 15 cm side!

Remaining glue together the two sides of the frame, forming a desired angle for you (in this case outer).

5.Preparing for the frame background. On a small piece of cardboard, the inner circle area made earlier framework for the creation of foundations. For example, if you used the offered me the dimensions, then you get a rectangle the size of 21h36 cm. Then measure from the long edge 15 cm, slightly slide the knife and bend to "blade" thoroughly took the form of the frame. Repeat the same procedure with the second part.

Insert the harvested within a framework for photos and, if desired, garnish with a baguette with artificial flowers. Just as it can be and other decorative elements, corresponding to the subject of "content" in the resulting 3D object.

6.Placing frames on the wall. It remains to fasten (glue) fasteners to frame and hang your creation in the corner to get the items to enjoy the decor!

But keep in mind, let alone 3D angular frame will not be able to create a striking effect as if there will be few, and they will be executed in a duet or even a pre-thought-out collage!

Previously published materials:

Why I did not throw the remnants of wallpaper after repair. 5 practical ideas

How to easily make a cool frame for your picture. 4 simple steps

IF YOU these tips will come in handy, or liked the article, be sure to click "THUMBS UP" OR SUBSCRIBEON CHANNEL !!

Thank you for your attention and I will be glad your comments!