How to make a simple tool for a marking of 59 rubles

Preparatory work in the repair, perhaps, the most lengthy and uninteresting, but depends upon the quality of all finishing work. Therefore, I think everything that can facilitate the work is worth our attention.

Recently, I saw on the Internet a device that is easy to cope with the markings on the plane had a simple form and artless adjustment. It also decided to make and see what came of it.

making

Here I nonadobilos: two pieces of wood, metal ruler, nuts and bolts and two self-tapping screws, However, is simple. Swept the line with a knife in the center of the bar under the slot where it will go, then I chose chisel groove.

Nuance

Paz tried to cut without play, but he appeared than I was much surprised, because the cut accurately, I had a simple idea to level him with a needle sewing around the edgesBacklash lost.

But I was happy for long, was ruler had a trapezoidal shape, that is, the width of the line to "walk" from edge to edge to 0.5 mm, and that's play. So when choose your line and you is important, check.

Assembly

In the second bar chisel choose a groove under the nut and gasket cut from a plastic bottle stoppers, nut "planted" on the glue. I successfully got a bolt to press the puck, which simply grind the edges and get a handle line lock.

All collected and the instrument is ready, display size, and makes a note fiksiruesh parallel lines if necessarySliding on the edge of the workpiece. Conceived on the scale of drill holes centimeter step to insert the pencil to the pencil when marking, but have not yet done, I think, worth it or not.

And while my other half did not see, even on a stool workout, cool! So, who should make and use, is a good thing - a marker marking gauge.

And can you subscribeAnd to share the publication with your friends in social networks, and even Like, soon there will be a number of new and interesting articles about homemade. Your home renovation.