How to make a mini circular saw on the knee. process of manufacturing

Today conceived to make a mini circular saw and set to work. Regular readers who are interested in my work, know what I'm doing homemade machine.

For this purpose it was collected base and attached drill to create an adjustable torque. And at the very foundation to attach different devices and gradually increase the functionality of the machine. That's turn came to conveyers.

making

The first step is to drill 10 mm He drilled in a long thread (connective) nutWhich is embedded in the rack, there will be rotating pin with fixed saw blade. It would be better set the bearing, but the market did not find a suitable inner diameter, yet decided to use this option.

And I I needed to drive the opening tab, Machined it, securing the drill in the segment pins washer using angle grinders with Flap wheels. He sharpened to include a drill, grinder and grind, for the first time came out crooked, and the second time out perfectly. Secure the drive by 10 mm studs and compress it with two washers and four nuts.

One edge of the set in a rack, where the drilled nut, and the other in the chuck drill site in greased rack, turned on, everything is fine is not heated.

I had to do a table and attach a parallel guide. disc height above the Stoic was 3 cm, but can then be increased to 4 cm of shortening the height of the table racks.

subscribe to the channel, Share the publication with your friends, like, put the Like, and tomorrow will be a new story. Your home renovation.