Installation of decorative concrete overlays for poles

After the test has been applied lacquer painted on a stone on the front of the fence and over the bank, decided to mount the accumulated laths on fence posts and profile sheets of mesh.

Let me remind you that the pads are made of "Washed concrete" technology look like this:

First, is not yet fully closed post. At the height of the column of 2m must be exactly 4.5 lining

Mounted on foam. Although, on the adhesive foam would be more convenient. The foam expands and it has to be prim. Otherwise, it pushes the cover, pushing forward from the post

Between blocks promazyvat masonry mortar. Sutures are then clobbered with the same solution and washing the water. Process I already known masonry blocks in front of the fence

The number of pads made for these posts was only enough for that. Subjectively, the fence began to look like something warmer. After varnishing stone appearance "of washed concrete" should start playing.

Why am I doing this? In one of the articles he wrote that he was poor quality paint, enamel 3 in 1 rust. And metal poles began to climb round:

Therefore, the lining is manufactured in two sizes. Lesser depth laths mounted on the fence of profiled sheet:

The photograph has turned controversial form and whether they are necessary here? This is due to the fact that the installation is not finished yet. Necessary to complete final assembly of blocks and pillars caps

I went accumulated tile for tracks by grades: perfect quality, chipped and marriage:

Remaining marriage debris. Later, they will use when casting monolithic tracks previously generations sledgehammer - added to the concrete as a filler.

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of useful information and interesting articles.