Dust collector for drill and rotary hammer for 15 minutes

Surely, if you are engaged in repair and drilled holes, You know as dust gives this process. Curious about how to resolve this problem, you will probably come across homemadePresented below, but decided that it is useful to recall will.

you can do just two devices cutting them out of a plastic bottle, One will collect dust from the walls, and the other from the ceiling.

Dust collector for wall

When assembling the dust from the wall to the cyclone collector You can connect a vacuum cleanerThis is the most effective method. And you can just screw the lidIt is less productive, but the problem is solved, and it is more convenient to keep.

To the neck of the collection was kept firmly in the tube of a vacuum cleaner, I wrapped him masking tape, the edges of which had to cut, I think, with this duct tape would have been better handled.

Dust collector for ceiling

Rubber dust collectors are included with the gun, but They solve the problem of protection against the ingress of dust into the cartridge holding the drill shank

. And if you set homemade trap out of the bottle, which is much wider, the besidesprevent dust from entering the cartridge it delay and a significant part of it.

note that edge traps I wrapped tapeto smooth the sharp edges, You can also do so or to use a different material such as masking tape.

Subscribe and share with friends on social networks, and I'm not just more of something to remind. Your home renovation.