Sedimentation of the well and the next repair vibrating pump for water
Previous part of the description of the process of repair of the vibratory pump water here
Once again, when the water began to lighten, sand content in it decreased - the time has come, which again went to "blur" with a high content of sand and clay:
I came to the conclusion that is not working gravel filter, which sprinkled the annulus casing. Or pebbles do not fell to the bottom and sprinkle the slot in the tube, or it is not enough. Although it poured buckets 20 to the ground surface.
Accordingly, in such circumstances, the pump has not worked for a long time:
I pulled out, disassembled. He was beaten coarse sand
Inside sand grinds the metal of the groove
I washed, collected, but after a couple of evenings pressure again fell to almost zero.
Another analysis of the vibratory pump
At this time, his work completed the sand - to pierce holes in the water intake side and has done a side
Brewed argon welding for tire - 600 rubles. Search cheaper in the city did not. At the top of drilled holes.
On the inside, which abuts the rubber valve all Stoch sand. I decided to put the perforated washer. But such a design is not worked for more than one day.
Tired of wasting time. I bought a new pump: Aquarius-3. This is the third brand purchased pump. The first was: Bavlenets and brook. Why this time Aquarius? That's because for him sold parts, in particular removable cover, which costs 175 rubles. She plastic. But it is possible to try to solder soldering iron when the sand will do it in the hole.
If I knew that the previous pump manufacturers do not provide their own service centers with spare parts (or do not have them), they would not have bought them.
And then - I did not torment the pump, called specialists and well washed from the sand, which is due to such irregular pumping namylo more than 6 m.
To be continued…
Subscribe per channel, introducing it in the browser bookmarks. There is a lot of useful information and interesting articles.