Useful content

What are 3 ways to help you apply the fitting solder re

click fraud protection

In the last article I shared my experience reuse fitting for welding polypropylene tubesAnd some readers even once it has been used, that pleases, so no wonder he wrote.

On this issue, it's a lot of feedback in the comments, People share their examples of the use of similar methods, for which special thanks to them.

TO my way to add two more, I decided to test them, compare and express your opinion about all three.

In principle, all variants were as drill-trimming of the welded pipe fitting, Here are the tools used for this are different.

It was used for metal cutting drill 19 mm, the crown of the tree by 18 mm, and down the drill, also at 19 mm.
It was used for metal cutting drill 19 mm, the crown of the tree by 18 mm, and down the drill, also at 19 mm.

Drills for metal

The first drill tested for metalBecause he had a shank 12.5 mm, then climbed it in just a drill. I tried to drill tee in the hands of, but his pull out, Holding clamp, the same nonsense, detail thrown and could spoil.

It turns out, seat so drill in a residential not to do? But, the solution was found, included reverse, and then drill even in the hands of I coped with the task.

instagram viewer

Cons: the price of 315 rubles, only drill with a drill on the reverse counter-clockwise direction, the massive dimensions, thick tail.

Of the benefits, get a good seat.

Drill down the tree

Another tried to drill down peretochennoe and I was surprised carved residue pipe as knife clockworkQuickly and easily and well price only 65 rubles.

More does not load screwdriver. And also, advantages include small size tool, Put in a bag, it takes up little space and is always at hand - I recommend.

of the minusesJust what it it was necessary to resharpenBut it's worth it.

The crown of the tree

Of the benefits of miniaturization and task handlesYou can use a screwdriver. On the downside can be attributed, what alone is unlikely to find itAnd then buy a set, and it is overcharge. The crown is require seatWhich is a soldering iron exactly in the center. More information about this method ...

video description

Output

Best used for such works peretochennoe pen 19 mm.

Subscribe and share with friends on social networks and the next time we consider how to make a detachable fitting. Your home renovation.

The husband made a shower in the bathroom and laid the floor not with tiles, but with stones, it turned out original

The husband made a shower in the bathroom and laid the floor not with tiles, but with stones, it turned out original

The shower has long needed a specific rework. The owner thought for a long time about the future ...

Read More

Old flexible hose. 5 ways to use

Old flexible hose. 5 ways to use

Photo 1. Broken flexible liners.After a certain number of years, any flexible eyeliner must be ch...

Read More

We moved from Khrushchev to the mansion, but the habits remained - they put everything in the corners

We moved from Khrushchev to the mansion, but the habits remained - they put everything in the corners

A married couple with two children moved from Khrushchev to a large house. Long-term living in a ...

Read More

Instagram story viewer