Fence with his hands. Installation of decorative covers "Washed concrete"

Previous Section

Next, in the final stage in the construction of concrete works facial fence - it covers on masonry wall layers between the pillars. It turned out that I have made to this point all the required number of caps. Because not every time considered their number. And with cracked lids in recruitment strength in the forms (halves) - a few pieces more.

Debris halves cracked lids. Some of them went to the final assembly of the lid.

For reliable locking caps on the solution - with a disk made grinder stone by three longitudinal slots. They go down the solution and the lid is locked therein reliably.

Many builders laid the cover on the foam. But I just needed a layer of the solution, since the under the cover laid armature.

Start laying the first span of the fence. Controlled horizontal level. Later he withdrew sizes and made final assembly of the covers.

Fence with stacked lids. Masonry block is finished. The most difficult thing - behind

It remains to wipe the seams under the covers. During the evening was only one way - 24 m

Solution filled joints on the upper side covers. After washing the water seams almost invisible - the cover looks solid monolith.

Further it is necessary to grind all the blocks from adhering sand and concrete parts, efflorescence, bathing the body are formed with seams water. This mixture was dripped on the surface of the blocks and their acquired Gray - stones merged with concrete.

To be continued…

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of useful information and interesting articles.