Mixer Anatomy - What is beyond repair
All of the single-lever mixer
At this time, we will examine, of which the major part is Single lever mixer on the sink. Consider major damage and detailsWhich at the same time should be replaced.
3 - clamping nut
4 - cartridge
5 - the body (frame body) of the mixer
6 - seals
7 - aerator
8 - spout
9 - monofilament spacer
10 - locking ring nut
11 - Rubber gaskets
12 - Fixing, nut mounting
Problems with mixer:
1 - water flowing out of the mixer lever, dripping from the spout (with the tap spout), and it is difficult to fasten the lever pivots.
Decision - replace the cartridge Number 4 in the photo
2 - water flows over and under the spout of the spout.
Decision - replace seals Number 6 in the photo, or podmotat under their landing fumlentu place to restore fit density.
3 - poor or no water comes out of the mixer.
Decision - clean aeratorNumber 7 on the photo.
elements of the lever
Methods for connecting the mixer to the water
The traditional way to connect flexible hoses, with the apparatus of the mixer (№1 photo). In fact, this bomb.
The best way connects through the needle (№2 in the photo), "sharpened" through the metal-base or other liner.
Subscribe to the Home Repairs