How to use a paint roller to achieve a perfect result. reveals the secrets

Good afternoon dear friends!

No matter what kind of coverage you want, painting technique is the same for any purpose. And apply it, the painting session, will not only be enjoyable and fun, but also perfectly efficient!

There are several ways to allow quick and easy to paint a large surface of the walls, ceiling, interior elements at a time. And with a roller, one of them. It's one of his movement to replace a few strokes of the brush, for example. The only work with him to be almost perfect, otherwise the texture is rough and uneven tone. So today I prepared 6 secrets to a flawless colorWhich will help you at least prevent such shibok, and at best make fun painting process.

To start, pick up the tools you need Dina and diameter. Then proceed in stages:

1.pour paint. The cooked container pour paint 2-3 cm. If you bought a good paint, its texture is medium viscosity. So, it remains on the roll, and will not drain from it when you start to apply it to the surface. Smell. It should be neutral. Selection of high-quality paint, it is one of the most important moments in the painting.

And yet, if you want to use container more than once, I recommend to put on his regular packet, so that after it was possible to simply remove. As a result, you will not have the capacity to change every time.

2.preparation roller. Before you start, dip the roller into clean water. After shake to remove excess water. Blot roller cloth or dry cloth. After this procedure, the paint will fall evenly on the entire surface thereof, and the application will not be partial.

If your cushion is made of fluffy material, before it is lowered into the water, walk on it with adhesive tape and remove all the unnecessary "parasitic" fiber.

3.Paint roller cover. Dip the roller into a container of paint and some times spend it here and there, until it is evenly covered. 5-6 reps need for a new roller.

Remove the crests of the container of paint excesses that during operation, the drops do not remain on the wall or on the floor.

4.The application of paint on the wall. Stepping about 10 centimeters from the floor, roller slide along the wall from the bottom upwards. Strongly do not press it, otherwise all "accumulated resources in it" will remain at the edges of the smear. Lightly crushing roller to the wall, continue moving up, stopping just inches from the ceiling. Without taking his roll away from the wall, pull it down.

Soon you orient and find the right balance between the pressing arm and applying the paint to the surface.

5.Pattern in the form of zigzag. "Paint" lines in a zigzag shape or W, while the layer of paint on the roller does not remain thin. Line of this format, getting rid of the traces of the wall on the smear edge roller.

In addition, the zigzag painting, allows to achieve a uniform coat of paint on the entire wall surface.

6.Applying a second layer. Do not forget to dip the roller into the paint as necessary, until the wall is not completely covered. When applying the second layer, repeat the procedure with a similar zigzag technique. Only pre-let the first coat dry.

If your goal is quite uneven coating. Then in that case you need to roll with the specific (decorative) forms, which at the touch of a wall, leave certain patterns.

Previously published materials:

All you need to know about the paint, from the purchase of brushes to color selection. 6 important nuances

How to make so you do not regret or 6 classic mistakes made when pasting the walls with wallpaper. their decisions

IF YOU these tips will come in handy, or liked the article, be sure to click "THUMBS UP" OR SUBSCRIBE ON CHANNEL !!

Thank you for your attention and I will be glad your comments!