How to clean and easy to scale deposit from the ceramic soleplate

Recently I bought an iron with ceramic sole. It is ceramics or cermet provides easy sliding and this improves the quality of ironing. Enjoyed a few days, they were glad as well to iron such utjuzhkom.

There was a nuisance.

At the next T-shirt ironing formed a deposit on the iron. Nagar just ingrained. Forgotten transfer device and ironed at high temperatures. How to return the original appearance of the instrument?

The shop sold special. pencil. Since it is easy to clean limescale and other impurities.

But if you want to clear quickly, and no time to run to the store? Then help the below listed methods.

Of iron can go unclean water. This indicates that you are using tap water instead of distilled or filter. We always pour from the filter.

1 descaling method

Calc-clean the appliance so. Dilute vinegar with warm water (1: 1) based on a third of the tank. Pour the solution into the reservoir.

Heat the device (at maximum) for 5 min. and set it upright.

Then click on the button for steam to escape. Do this at arm's length, otherwise you will inhale the acrid steam. Residues poured to the last drop, and pure water is poured. Again, include a maximum and tight on the button - the steam poured the remaining water and wipe.

2 descaling method

If you do not want to use vinegar, it is suitable citric acid. Dilute it (25 g.) In one glass of water at room temperature. Stir well to dissolve crystals.

Preheat unit to the maximum temperature for 5 minutes. Prepare a basin and holding the iron over it, click on the button - pairs. Pour the liquid from the device remnants, then pour clean water, and again click on the pairs. Wipe base to purity.

Sole - fouling

Nazhdachku or other items that will scratch the soleplate can not be used.

Nagar cleaning solution (water with vinegar in equal parts). Wear gloves. Moisten a cloth and wipe the sole.

The most effective way of using soda. 2 tsp. baking soda and dilute the liquid soap to form a thick paste.

Heat the appliance and leave for 5 minutes. On a cloth applied solution and rub portions with soot. Then wipe the ceramic coating with a clean cloth. Pour into water and let the steam iron. Then again wipe the soles.

Channel RemontDom: SUBSCRIPTION. For Husky thanks in advance! Good luck and all the best.