Bath of slabs or boards 15 000: serves up to 50 years

Build a sauna from a bar or a log - it's expensive, time consuming and difficult. How to build a sauna with a maximum of useful features and comfort without spending a lot of time and money? There is a solution: build a sauna from the boards. Easy to install in a short time and a bathhouse is ready!

This building will much cheaper than other materials. just over 15 thousand rubles good bath for a month.

This is not the old version of the baths. It can be fully heat thoroughly wash and even in the winter. Bath of the boards can serve up to 50 years. Board dries quicker than a log and not what will rot.

The main thing to do everything right. Incidentally, a light bath can be moved from place to place, if necessary.

The basis of the construction - the frame that rests on the foundation. If you do not have enough money for the purchase of boards, even lagging or slabs can be used. This bathhouse without shrinkage and can be built in different sizes and designs.

The technology resembles the construction of the carcass baths with OSB sheathing panels. Only instead of the sheathing board is used. Disadvantages are the same as that of the baths from the timber or logs: rotting, cracking, warping, and so forth. But the main plus bath from boards - no shrinkage.

Another plus: for the bath of the boards, meaning the light weight, you can do as a tape, and columnar foundations. And you can make the foundation of ties b / y. See how to make bath 20 000 sleepers with b / y.

For timber frame need not less than 50x100 mm. For primary plating - boards (larch, pine, fir). Roofing felt and only as a vapor barrier can not be used in a bath. They will produce harmful substances.

Most suitable foil film. They are well retain heat and do not miss the steam under the skin.

The frame is made of uprights, which are secured to the strapping sill. Fixing is carried out by means of metal parts. You must have the struts for backup racks. Between uprights - the width of the size of a heater (mineral wool - 5 cm.). Not suitable foam or fiberglass for insulation.

paneling or plywood is suitable for interior paneling. By lining foil vapor barrier. The ceiling of the lag and are thin 20cm. board. Above pour boards 20 cm. sawdust and the top 10 cm. layer clays.

Channel RemontDom: SUBSCRIPTION. We thank readers for their attention and huskies - good luck to you all!