My selection tool before construction
The spring 2010. The desire to start construction is lost, the plans have not changed.
How to start building? With the selection and purchase of the tool (if present).
The guided in choosing? Here is my opinion:
- The load on the tool (frequency of use), and as a consequence of the choice of price range
- Ergonomics. Ease of use, design
- Price / quality / brand.
Recently, the first place is the price of the instrument. Buyer began to choose their pocketbooks. This is indicated by many directors of specialized shops. I know, because often communicate with them on the field.
Large hypermarkets with a huge choice of instrument at that time in the city was gone. The tool acquired in specialized stores.
Just purchased the whole list of the villa utensils and hand tools. List of prices will show below.
I propose to review a list of what I chose at the time.
1. Boer TISE-3F, reinforced
As decided to dig holes under the piles for a bath, I needed a drill. Boer TISE. I decided to buy from the manufacturer to the delivery transport company.
At the end of this article I will point out the value of each position, and yet will list and briefly describe the purchase of tools.
Drilling depth: 1.8 m, diameter piles - 250 mm. expansion diameter: 600 mm.
Bur after working with him at two sites (drilled about 60 holes) Before being sold in 2018. Yes, the drill was sold because work with it are no longer anticipated.
In a previous article I wrote that this drill design allows for expansion in the base of the pile. And the expansion will prevent the extrusion of piles of frost heaving. But the work with him - it's a hell of a pipe.
2. Petrol Stolzer HT 2500 L
Because electricity in our village has not yet been, and was not expected in the next 1-2 years, was purchased Petrol for the mixer, elektrorubanka and drill for drilling holes in the rod for driving dowels.
Features: petrol engine from Honda, 220, 2kW, 12 B, 40 kg, 15L tank
Guided by the criteria: engine reliability, price, and power generator.
3. LBM (Bulgarian) Sparky M-750
Semi-professional tool, low power, sufficient for what would have to saw off valves.
Features: Circle Diameter: 125 mm power: 750 W, rotation speed at idle: 10000 revolutions / min
Sparky is now on sale almost none. And no wonder. As it turns out, is not a reliable tool corresponding to the economy class. After the season he borrowed a relative gave for grinding work. Blown rotor. Apparently, he held her, underestimating the momentum. Repair, rotor replacement cost somewhere in the 1800r. But after two years of short-term work LBM burned again. Sparky service centers with the presence of spare parts are no longer turned (or so I was looking for) and I decided to buy in 2017. before the next construction season another angle grinders.
4. Concrete CM 125, L 130
Drum volume 130 liters. Weight 59 kg, dismountable. Packaged in a box, which can be transported in any car.
Optimum volume mixing mixer. Kneading the amount of calculation 4 buckets concrete. Five buckets - it is difficult to twist and concrete pouring out of the drum.
5. Chainsaw Stihl MS180
Features: Power: 2 hp, weight: 3.9 kg.
Brands Stihl and Husqvarna chainsaws among the considered the most reliable and unpretentious in operation. Selection of Chinese models was then not so wide and the quality was very low.
6. Jigsaw Sparky TH-60E
Power: 500W
I took the jigsaw to the heap. Just in case. Work on it is not planned. He was almost two years and spent nearly idle.
7. Elektrorubanok KW 712 B & D
Features: 650W, width: 82mm, depth control treated surface: 0-2mm, Number of revolutions: 15,000 rpm / min
On elektrorubanok lay down a big load in the construction of the bath. They planed every board on both sides. The inner and outer part. We can say that this tool is worn out almost completely during the construction season. And if you need a tool for long-term operation - becomes more robust and expensive, with soft start.
8. Trolley TCH422, 110 l
truck was purchased for ground works. On the two wheel axis (for stability). Reliable, sufficient body shell thickness does not crumple like a cheap model.
In parallel with this acquisition tool was a question: where to store the concrete mixer truck, shovels, buckets? If the tool you can take with you in your car, you need to keep large-sized. I decided to buy an iron container.
9. container 3t
This photo is not my container, but mine was painted in the same green color.
Of course, I would like to buy more container, 5t, but did not find in the ads. Acquired with the terms of delivery and unloading at the site.
10. Small things to build
There were also purchased:
Tape 20 m Gidrouroven 15 m. Grinder for cutting discs 125 * 2.5 * 22 Additional chain saws, Jig saws for B-11, 25 m Electroextension. Canister 10 liter gasoline, plastic tanks for water 90 L, Buckets 15 l. Ax, hammer, Goggles.
List and information with the prices and the total amount spent on the purchase of tools and all kinds of utensils:
In general, the beginning of summer, I was ready to begin construction. He began with excavation site with the layout under the bath and remove the sod. But this - in the next article.
Read more: Why am I no longer choose a drill TISE !?
Read from the beginning:Why I decided to build a house?
Subscribe per channel, introducing it in the browser bookmarks. There is a lot of information.