Useful content

The alarm for the WWTP Topas

click fraud protection

Alarm is set to septic tanks, sewage treatment plant to prevent the fault of the owner, overflow structures, by light or sound alerts.

Light warning fault of the owner in the facilities is as follows:

The alarm for septic tank
The alarm for septic tank

Top treatment plant (in this case, Tapas) Installed lamp. If the station does not function correctly, the lamp will light up and notify the owner. After that, it is necessary to stop the sewage drained into the station, turn off and cause Customer service.

How to connect the alarm with his own hands

You will need:

  • Incandescent lamp and lamp;
  • Electric float switch for level;
  • small piece polypropylene pipes 20th diameter.
The lamp of the alarm
The lamp of the alarm

Incandescent lamp and lampshade

Mounted on the cover, by drilling. Screws are supplied with a lampshade. Before drill cover, it is necessary to identify the installation location on the lid WWTP making a through hole in the cover, and thread the electric cable. Connect the cable to the terminals of the cartridge inside the ceiling and drill the bowl in place.

instagram viewer
Electric alarm float
Electric alarm float

float switch

The main element of the alarm, it occurs via chain circuit and activating an emergency mode. Electric cable float is passed in a piece of polypropylene tubing and is installed inside the treatment plant. Further, the cable is threaded into the treatment plant control box and connected to the electrical plant.

Connecting the alarm
Connecting the alarm

The electric wire connection box without a passport to the station will be difficult to make out what and where to connect. Arm yourself with a passport in the treatment plant, usually at the end of the circuit connection has an alarm.

Typically, electrical wiring diagram of the float is as follows:

Wiring alarm
Wiring alarm

Now you can put a float and connect the electrical part, but at what level you need to install the float, so that it has activated the alarm. The float is installed at a level to fire alarm until contact drain pipes and sewage. To this end, and set the alarm, so that in case of clogging of any node alarm I warned you, and that you have stopped to drain waste water in order to avoid filling the sewer going from houses.

How to insulate a loggia Penoplex

How to insulate a loggia Penoplex

Some owners try so equip the loggia of the apartment, so that it became an independent dwelling. ...

Read More

Plastushka: facing on the nature

Plastushka: facing on the nature

Despite the abundance of artificial decoration materials, natural deserved demand. Sandstone or p...

Read More

How to use the 5 inexpensive design ideas to make your kitchen again fashionable and comfortable

How to use the 5 inexpensive design ideas to make your kitchen again fashionable and comfortable

Good afternoon dear friends!Kitchen - multifunctional space in any home. Which includes not only ...

Read More

Instagram story viewer